[DE] [EN]
Rütisbergstrasse 3
8156 Oberhasli
Switzerland
Phone +41 44 852 50 50
Fax +41 44 850 67 07
Product group
Battery systems |  | Roller application device type «DWE» The roller application device type «DWE» is especially suitable for controlled application by means of a screen or stippling roller with a doctor blade. By using engraved rollers, precisely controlled application of plain colors, lacquers, glue and adhesives, primers, coatings etc. is achieved. Application of solvent-containing, aqueous and 100 % systems as well .... |
 | | LABCOATER type «LTE-S» LABCOATER type «LTE-S», the optimum combination of dryer and laboratory coating table. Various kinds of material samples are coated and heat treated in the same run. The coating is applied either by a floating, roller or rubber blanket knife. Multiple coatings which do not require re-loading are also possible. |
 | | Laboratory coating unit type «SV» The laboratory coating device type «SV» is used to coat single material samples. Coating is performed with a floating, roller or rubber blanket knife. |
 | | Reverse roll coater type «BA-RRC» Multiple roller applicator for the application of primers, lacquers, solvent-containing, aqueous and 100% systems, UV lacquers as well as pretreating agents onto aluminum, steel sheets and other materials. The plant conditions can be reproduced on a small sample size as various parameters such as roller speed and roller distance can be set precisely. |
 | | Paste evacuating device
type «LPE» This table model can be used when air and bubble free pastes, lacquers etc are required. |
 | | 2-Roll laboratory calender type «KAL» The 2-Roll laboratory calender type «KAL» is used for treating the surface of material samples. Material surfaces are calendered in various ways under pressure and with the use of heated rollers. |
 | | Continuous coating systems type «KTF-S» Continuous doctor knife coating with subsequent drying are the basic functions of the «KTF-S». The continuous coating system type «KTF-S» is used where the required sample length makes economic use of a large machine impossible. |
 | | Production of battery components, type «BA 16006» The application material is applied to a metal or plastic foil or paper in a reverse roll coating process or as a doctor knife coating. The coated web feed runs through various drying stages and is subsequently wound up. |
 | | Coating of anodes and cathodes for the manufacturing of Batteries Mathis AG has developed an R&D range specifically for the coating of anodes and cathodes. The multifunctional coating head is designed for various coating processes like slot die, doctor knife coating and more. The coating head allows for position settings from 8 to 12 o’clock. The gap adjustment is possible either by hand or automatically. Wet and dry weight me .... |
Werner Mathis AG :: Rütisbergstr. 3 :: CH-8156 Oberhasli :: Tel + 41 44 852 50 50 :: Fax + 41 44 850 67 07 :: info@mathisag.com
Werner Mathis AG
Rütisbergstr. 3
CH-8156 Oberhasli
Tel + 41 44 852 50 50
Fax + 41 44 850 67 07
info@mathisag.com
Rütisbergstr. 3
CH-8156 Oberhasli
Tel + 41 44 852 50 50
Fax + 41 44 850 67 07
info@mathisag.com