[DE] [EN]
Mathis AG world wide
Rütisbergstrasse 3
8156 Oberhasli
Phone  +41 44 852 50 50
Fax +41 44 850 67 07

Product group


Roller Application DeviceRoller application device type «DWE»
The roller application device type «DWE» is especially suitable for controlled application by means of a screen or stippling roller with a doctor blade. By using engraved rollers, precisely controlled application of plain colors, lacquers, glue and adhesives, primers, coatings etc. is achieved. Application of solvent-containing, aqueous and 100 % systems as well ....

Infrared DryerInfrared dryer type «IR-K»
IR dryer into which the material holders of the previously mentioned dryers and coaters can be placed. Infinitely variable heating from above, below or both sides. Short wave IR radiators.

LABCOATER with Coating DeviceLABCOATER type «LTE-S»
LABCOATER type «LTE-S», the optimum combination of dryer and laboratory coating table. Various kinds of material samples are coated and heat treated in the same run. The coating is applied either by a floating, roller or rubber blanket knife. Multiple coatings which do not require re-loading are also possible.

Coating DeviceLaboratory coating unit type «SV»
The laboratory coating device type «SV» is used to coat single material samples. Coating is performed with a floating, roller or rubber blanket knife.

Laboratory Hot Air OvenLaboratory hot air oven type «LTH»
This hot-air oven can be used for drying, hardening and baking primers, paints, lacquers or similar surface coatings. The sample material such as steel sheets, aluminum etc. can be coated on our Reverse Roll Coater RRC-BW with the «coil coating method». After coating the sample is placed onto a holder and transported into the dryer for subsequent heat treatment.

Reverse Roll CoaterReverse roll coater type «BA-RRC»
Multiple roller applicator for the application of primers, lacquers, solvent-containing, aqueous and 100% systems, UV lacquers as well as pretreating agents onto aluminum, steel sheets and other materials. The plant conditions can be reproduced on a small sample size as various parameters such as roller speed and roller distance can be set precisely.

Paste Evacuating DevicePaste evacuating device type «LPE»
This table model can be used when air and bubble free pastes, lacquers etc are required.

Continuous coating systemsContinuous coating systems type «KTF-S»
Continuous doctor knife coating with subsequent drying are the basic functions of the «KTF-S». The continuous coating system type «KTF-S» is used where the required sample length makes economic use of a large machine impossible.

Coil coating system for coating and drying steel and aluminum coilsCoil coating system type «BA 15706»
Coil coating system for coating and drying steel and aluminum coils. The application material, in this case lacquers of different colors, is applied to one or both sides of an aluminum coil with the «reverse roll coating» process. In two-shift operation up to 38,000 meters of aluminum coil are coated daily.

Production of Battery ComponentsProduction of battery components, type «BA 16006»
The application material is applied to a metal or plastic foil or paper in a reverse roll coating process or as a doctor knife coating. The coated web feed runs through various drying stages and is subsequently wound up.

Foil coating RangeFoil coating Range for the painting industry type BA 20712
A coloured base coat and clear coat are applied to foil and pre-dried. This coating is only around one millimeter thick. Covered by a transparent protective coating, it can be cut to size and applied in large or small-scale production runs at almost any location. Here, the foil is deep-drawn into the final shape, cured with UV light and back-foamed to the completed c ....

Crockmeter for friction resistanceCrockmeter for friction resistance «CRO-B»
Crockmeter type «CRO-B», to determine the abrasion resistance of dyed and printed textiles. Tests are carried out on dry or wet textiles in accordance with internationally recognized standards.
(BS 1006D02, ISO 105-X12/D02 ATTCC 8-2001).

Werner Mathis AG :: Rütisbergstr. 3 :: CH-8156 Oberhasli :: Tel + 41 44 852 50 50 :: Fax + 41 44 850 67 07 :: info@mathisag.com
Werner Mathis AG
Rütisbergstr. 3
CH-8156 Oberhasli
Tel + 41 44 852 50 50
Fax + 41 44 850 67 07