[DE] [EN]
Rütisbergstrasse 3
8156 Oberhasli
Switzerland
Phone +41 44 852 50 50
Fax +41 44 850 67 07
Product group
MATHIS AG » Products » Coating » Discontinuous |  | Laboratory coating unit type «SV» The laboratory coating device type «SV» is used to coat single material samples. Coating is performed with a floating, roller or rubber blanket knife. |
 | | LABCOATER type «LTE-S» LABCOATER type «LTE-S», the optimum combination of dryer and laboratory coating table. Various kinds of material samples are coated and heat treated in the same run. The coating is applied either by a floating, roller or rubber blanket knife. Multiple coatings which do not require re-loading are also possible. |
 | | Thermotester for plastics
type «LTE-T» The thermotester type «LTE-T» is an almost fully automated oven for determining the thermal (static) stability of plastics. In combination with the coating device the «LTE-T» can be used as both a gelling oven and also as a universal testing oven for plastics applications. |
 | | Reverse roll coater type «BA-RRC» Multiple roller applicator for the application of primers, lacquers, solvent-containing, aqueous and 100% systems, UV lacquers as well as pretreating agents onto aluminum, steel sheets and other materials. The plant conditions can be reproduced on a small sample size as various parameters such as roller speed and roller distance can be set precisely. |
 | | Laboratory hot air oven type «LTH» This hot-air oven can be used for drying, hardening and baking primers, paints, lacquers or similar surface coatings. The sample material such as steel sheets, aluminum etc. can be coated on our Reverse Roll Coater RRC-BW with the «coil coating method». After coating the sample is placed onto a holder and transported into the dryer for subsequent heat treatment. |
 | | Paste evacuating device
type «LPE» This table model can be used when air and bubble free pastes, lacquers etc are required. |
 | | Roller application device type «DWE» The roller application device type «DWE» is especially suitable for controlled application by means of a screen or stippling roller with a doctor blade. By using engraved rollers, precisely controlled application of plain colors, lacquers, glue and adhesives, primers, coatings etc. is achieved. Application of solvent-containing, aqueous and 100 % systems as well .... |
 | | Infrared dryer type «IR-K» IR dryer into which the material holders of the previously mentioned dryers and coaters can be placed. Infinitely variable heating from above, below or both sides. Short wave IR radiators. |
 | | Sizepress type «SP» Sizepress for dyeing and finishing as well as application of optical whitener onto paper samples. |
 | | Crockmeter for color fastness type «CRO-B-P» Crockmeter type «CRO-B-P», for determining the abrasion resistance of coil-coated metals, lacquers and coatings. (EN 13523-11:2004) |
 | | 2-Roll laboratory calender type «KAL» The 2-Roll laboratory calender type «KAL» is used for treating the surface of material samples. Material surfaces are calendered in various ways under pressure and with the use of heated rollers. |
Werner Mathis AG :: Rütisbergstr. 3 :: CH-8156 Oberhasli :: Tel + 41 44 852 50 50 :: Fax + 41 44 850 67 07 :: info@mathisag.com
Werner Mathis AG
Rütisbergstr. 3
CH-8156 Oberhasli
Tel + 41 44 852 50 50
Fax + 41 44 850 67 07
info@mathisag.com
Rütisbergstr. 3
CH-8156 Oberhasli
Tel + 41 44 852 50 50
Fax + 41 44 850 67 07
info@mathisag.com