[DE] [EN]

MATHIS AG » Products » Coating » Discontinuous

LABCOATER type «LTE-SM»

LABCOATER type «LTE-S», the optimum combination of dryer and laboratory coating table. Various kinds of material samples are coated and heat treated in the same run. The coating is applied either by a floating, roller or rubber blanket knife. Multiple coatings which do not require re-loading are also possible.


LABCOATER type «LTE-SM»
LABCOATER type «LTE-SM» 


Options
Infrared radiation pyrometer, for contactless measurement of the surface temperature of the material sample
Exhaust air fan
Automatic cover lifting
Driven air flap control Laminating device type «SV-K», for laminating PVC in the reversing method
Fast laminating device type «K-SK», for laminating PU immediately after coating
Coating device with motor drive
Smartview for data recording



Accessories
Adjustable pin frame
Pin frame adjustable in length and width, both to stretch textile materials
Reversing pin frame
Paper and foil frame
Sieve frame, for holding loose material


Technical data

Temperature range Up to 250 °C / 300 °C
Dwell time 5 s to 999 min
Air circulation infinitely variable
Feed and delivery automatic
Sample sizes 330 x 430 cm max. (only drying)
280 x 300 mm max. (coating and drying)
Coating speed 0.2 – 4 m/min (coating device with motor drive)
Setting accuracy of the coat thickness 0.01 mm
Operation Univision
Dimensions W x D x H 1015 x 1135 x 950 mm
(D = 1450 mm, transport frame extended)
Weight ~280 kg





Werner Mathis AG :: Rütisbergstr. 3 :: CH-8156 Oberhasli :: Tel + 41 44 852 50 50 :: Fax + 41 44 850 67 07 :: info@mathisag.com
Werner Mathis AG
Rütisbergstr. 3
CH-8156 Oberhasli
Tel + 41 44 852 50 50
Fax + 41 44 850 67 07
info@mathisag.com