Laboratory pad steam unit type «PSA-HTF», for continuous and practice-oriented operation for steaming and after-treatment of a pad steam process.
The «PSA» is used for steaming with saturated steam and slightly overheated steam up to 130 °C. The «PSA-HTF» with superheating aggregate can be used for HT steam up to 250 °C with regulated humidity and hot air drying up to 250 °C. Wash troughs with a material content of 1 m, 2 m or 4 m are available for the after-treatment of the dyed goods. Steam heating units, with or without automatic temperature control, ensure the required temperature.
Pad-steam range type «PSA-HTF»
Chemical trough for wet-on-wet impregnation
Reverse roll coater
Infrared pre dryer
HTF – superheating aggregate
E-control
Wash troughs with fabric content of 1 m
Wash troughs with fabric content of 2 m, wide format
Wash troughs with fabric content of 2 m, high format
Wash troughs with fabric content of 4 m
Temperature control for wash troughs
PSA-HTF» 350
PSA-HTF» 500
Roller width
350 mm
500 mm
Working width
300 mm
450 mm
Steaming chamber fabric content
2 – 8 m
2 – 8 m
Material speed
0.2 – 10 m/min
0.2 – 10 m/min
Dwell time
10 s to 40 min
10 s to 40 min
Temperature range
100 – 130 °C or 250 °C (HTF)
100 – 130 °C or 250 °C (HTF)
Liquor trough content
0.5 – 2 l
0.5 – 2 l
Chemical trough content
1 – 2 l
1 – 2 l
Dimensions W x D x H
2100 x 1400 x 2100 mm with 4 wash troughs with 1 m content
