This hot-air oven can be used for drying, hardening and baking primers, paints, lacquers or similar surface coatings. The sample material such as steel sheets, aluminum etc. can be coated on our Reverse Roll Coater RRC-BW with the «coil coating method». After coating the sample is placed onto a holder and transported into the dryer for subsequent heat treatment.
Laboratory hot air oven type «LTH»
This combined unit with a coating device and drying oven is suitable for a number of laboratory tests. This saves much more expensive and complex experiments with production systems.
Infrared radiation pyrometer for contactless measurement of the surface temperature of the material sample
Exhaust fan 30 m³/h max.
Automatic cover raiser
Holder for sieve frame, tilting, with water trough
Smartview for data recording
Temperature range
Up to 400 °C / 450 °C
Dwell time
5 s to 999 min
Air circulation
infinitely variable
Feed and delivery
automatic
Sample sizes
300 x 380 mm max.
Operation
Univision
Dimensions W x D x H
~935 x 1070 x 1020 mm (D= 1560 mm, transport frame extended)
